Minwax®
Pre-Stain Wood Conditioner penetrates the grain of the wood to promote
uniform acceptance of wood stain. Minwax® Pre-Stain Wood Conditioner
helps prevent streaking and blotching to help ensure a beautiful, even
stain. It is specifically designed for use before staining new or bare
softwood surfaces.
Directions
1.Apply
before staining on clean, raw wood, using a brush or cloth.
2.Allow to penetrate for 5 to 15 minutes, then remove excess with clean,
dry cloth.
3.The stain should be applied within two hours of application of Minwax®
Pre-Stain Wood Conditioner. For best results, stain with Minwax®
Wood Finish™, Minwax® Gel Stain, Minwax® PolyShades®.
Coverage: Approximately 100 - 125 square feet per quart.
Cleanup:
Mineral spirits or paint thinner, following manufacturer's safety instructions.
Note:
Minwax® Pre-Stain Wood Conditioner is not recommended for use with
water-based stains. For water-based stains, pretreat wood with Minwax®
Water Based Pre-Stain Wood Conditioner.
