Paint Colors :: MANUFACTURERS :: LAST-N-LAST :: ABSOLUTE COATINGS 89001 ABSCO POLYURETHANE WOOD FLOOR FINISH GLOSS 450 VOC SIZE:1 GALLON.

    ABSOLUTE COATINGS 89001 ABSCO POLYURETHANE WOOD FLOOR FINISH GLOSS 450 VOC SIZE:1 GALLON.
ABSOLUTE COATINGS 89001 ABSCO POLYURETHANE WOOD FLOOR FINISH GLOSS 450  VOC SIZE:1 GALLON. 

Absco Polyurethane Wood Floor Finish 450-VOC
ABSCO Professional Polyurethanes offers the latest technology in environmentally compliant wood floor finishes. ABSCO’s high solid content will beautify and protect most commercial and residential wood floors, providing years of enjoyment. ABSCO can also offer superior protection to most other interior wood surfaces, such as handrails, trim, furniture and cabinets.

RECOMMENDED USES:
Absco Polyurethane Wood Floor Finish is recommended for most interior commercial and residential wood.

TYPICAL PROPERTIES
Color in Container :Gloss - Clear / Satin - Hazy/ Semi-Gloss – Hazy
Solids Content/weight: Gloss – 50% / Satin – 51% / Semi-Gloss – 51%
Chemical Resistance: Excellent
VOC: VOC does not exceed 450 grams/liter
Flash Point: 105°F
Sheen Gloss: No less than 90 units on wood.
Satin: 25-35 units on wood.
Semi-Gloss: 50-60 units on wood.
Freeze/Thaw Stability: Stable
Shelf Life: Unlimited in unopened container.
Drying Time: 12 hrs. under good condition.
Cleanup: Mineral Spirits, Paint Thinner, Turpenine.
Application method: Lambswool applicator, natural bristle brush or E-Z Way Applicator.
Coverage Approx: 500-600 sq feet per gallon on raw wood.

Proper surface preparation is essential to achieve a high quality finish. Read the MSDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.

Surface Preparation:
New or Newly Sanded Floors or Wood Surfaces: Prepare the floor according to NWFA or NOFMA accepted standard. The final pass before application of Absco Polyurethane Wood Floor Finish and sealer should be a #150 grit screen pad or sandpaper. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with mineral spirits. Avoid using fillers that contain stearates or wax. The floor or work surface and room temperature should be at least 65°F.

Previously Finished Floors or Wood Surfaces: Remove old finish in poor condition. Screen the work surface with a #150 screen disc, #180 grit sand paper, maroon pad or similar. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with mineral spirits. Avoid using fillers that contain stearates or wax.The floor or work surface and room temperature should be at least 65°F.

REMEMBER TO STIR THIS PRODUCT BEFORE AND DURING USE. SATIN AND SEMI-GLOSS CAN BE SHAKEN. AFTER SHAKING, LET IT SIT FOR 10 MINUTES.

Application:
Apply the finish with the grain of the wood. Apply in well ventilated area by brush, roller, spray, EZ way, lambswool applicator at room temperature and not in direct sunlight. When using a roller, work slowly to avoid air bubbles. Screen the floor or work surface in between coats with any of the following #150 screen disc, #180 grit sand paper, maroon pad or similar in between coats. Remember to vacuum and tack thoroughly after screening to remove all dust. Allow minimum of four to eight hours between coats, or until thoroughly dry. Heavy finish application, high humidity or lack of airflow will extend drying times. If waiting longer than 24 hours between coats, sanding is recommended.

Application over stain:Absco Polyurethane Wood Floor Finish should adhere well to most stain. A test for adhesion over brands other than Last•n•Last stain is recommended. Use Last•n•Last Classic Wood Stain following instruction on label. Allow the stain to dry a minimum of 24 hours under good conditions. Make sure the stain is completely dry before applying the Finish. Drying time: When applied according to directions, and in thin coats, Absco Polyurethane Wood Floor Finish should be dry to the touch in 4-6 hrs. Allow minimum of 12 hours between coats. Heavy finish application, high humidity or lack of airflow will extend drying times. Absco Polyurethane Wood Finish completely cures within 2 weeks.

Clean up:
Use paint thinner, mineral spirits or turpentine to clean brushes and applicators.

Maintenance:
Absco Polyurethane Wood Floor Finish never needs waxing. We recommend Polycare Floor Cleaner as the safe and effective cleaning product for all polyurethane coated surfaces. It has a unique soap-free, no rinse formula which will not harm polyurethane or varnished wood surfaces.

 
   

Details
 
SKU: 5149189001
Weight11.00 lbs
Market price: $46.73
Price: $23.36

Options
 
Quantity Out of stock



  50%
 

    Detailed images
ABSOLUTE COATINGS 89001 ABSCO POLYURETHANE WOOD FLOOR FINISH GLOSS 450  VOC SIZE:1 GALLON.

 

    Recommended products list
  • WOLMAN 14416 F & P CEDAR SIZE:1 GALLON.
  • CABOT STAIN 11407 DEEP BASE DECKING STAIN SIZE:1 GALLON.
  • WOOSTER 0970 PAINTER'S CHOICE COUNTER DISPLAY
  • WOOSTER 4731 ADVANTAGE ANGULAR SASH BRUSH SIZE:3" PACK:6 PCS.
  • WOOSTER BR403 JUMBO KOTER PLASTIC TRAY SIZE:4.5" PACK:12 PCS.
  • HYDE 45200 WINDOW OPENER
  • ZINSSER 02986 PAPER SCRAPER
  • RUSTOLEUM 7585838 SPRAY FLAT COLD GALVANIZING COMPOUND SIZE:15 OZ. SPRAY PACK:6 PCS.
  • KRYLON K358 SPRAY WEEKEND GLOSS BLACK SIZE:11 OZ. SPRAY PACK:6 PCS.
  • 3M 9560 3M SANDBLSTR ANG SPONGE 100 PACK:12 PCS.
  •  
     

     

    Popular Categories

    METALLIC PAINT

    WOOD STAINS

    CONCRETE FLOOR PAINT

    POOL PAINT

    SPRAY PAINT

     

     

     

    Popular Brands

    MODERN MASTERS

    HAMMERITE

    DRYLOK

    CABOT STAIN

     

    ZAR

    MINWAX

     

    Best Seller Products

    Minwax Poly

    Zar Stain

    Danish Oil

    Last N Last

    Roller Cover

    Modern Masters Metallic Paint

    Hammerite Paint

     
     
    We accept major credit cards
    credit cards logo
     
     
    SEO by site SEO
     
     
    CONNECT WITH US
    Copyright 2005-2015 Paint Colors - All Rights Reserved