Minwax® Wipe-On Poly is a durable, clear polyurethane that provides protection with classic, hand-rubbed beauty. Minwax® Wipe-On Poly is applied with a cloth that avoids drips and brush marks.

1.Surface must be dry and free of old finishes in poor condition, wax, grease, polish, dirt or other foreign matter.
2.Sand to obtain a smooth, uniform surface. Remove all dust with a cloth dampened with mineral spirits.
3.If desired, apply stain, such as Minwax® Wood Finish™, following the label directions for application instructions and dry times.
4.Shake Wipe-On Poly container thoroughly before use.
5.Put a liberal amount of Wipe-On Poly on a clean, soft, lint-free cloth and rub into the wood.
6.Allow to dry at least 2-3 hours. Sand entire surface lightly with very fine sandpaper (220 grit) or fine steel wool. Remove all sanding dust.
7.Apply a second coat in the same manner as the first. If a third coat is desired, repeat Step 6 before application.
8.Allow final coat to dry 24 hours before normal use.

Cleanup: For easy cleanup, use mineral spirits or paint thinner.

Coverage: Approximately 125 sq. ft. per quart.

Floors: Wipe-On Poly may be used to touch up small scratches on floors. Apply carefully as gloss level may not be identical to the existing floor finish.

Note: Wipe-On Poly is not recommended for general use on floors. To protect floors, use Minwax® Super Fast-Drying Polyurethane for Floors or Minwax® Fast-Drying Polyurethane