|  
        Shellac-Base 
          Primer-SealerUltimate Performance Primer-Sealer
 
         
          For 
            interior and spot exterior use 
          Greatest 
            stain sealer 
          Seals 
            knots and sap streaks 
          Seals 
            pet, smoke and musty odors 
          Sticks 
            to all surfaces without sanding 
          Lightning 
            fast dry - recoat in 45 minutes
 B-I-N®, 
        developed in 1946, is the original shellac-based white-pigmented primer-sealer 
        stain-killer. Great for use on all interior surfaces & spot priming 
        on exterior surfaces. It is formulated to seal, prime and block out stains 
        on previously painted or new work. Any oil or latex paint can be applied 
        over it. Professionals love B-I-N because it dries faster than any other 
        primer. It cures as fast as it dries, making it ideal for kitchen cabinet 
        repainting, doors, and trim work. Fire damage restoration painters love 
        B-I-N because it seals in the acrid smell of fire, as well as sealing 
        in water, soot, and grease stains that plague such jobs. (For more information, 
        see Shellac in Fire Damage Restoration Bulletin). As a stain sealer, B-I-N 
        is unsurpassed. Water stains, mildew stains, knots in new wood, nicotine, 
        gasoline, marking pens, etc. can all be reliably sealed with B-I-N.  
        B-I-N 
          seals surface pores so you use less finish paint. Finish coat has rich 
          uniform appearance, with no "high" and "low" spots. 
          Finish resists dirt better and has better scrubbability. One coat of 
          B-I-N kills - that is, covers and locks in even the worst stains that 
          bleed through multiple coats of paint. With B-I-N, there is no bleed-through 
          into the top coat to ruin the job. B-I-N 
          adheres tenaciously to all dense, smooth and slick surfaces such as: 
          dense hardboard, chipboard, glass, Formica® , ceramic tile, PVC 
          & metal pipes, radiators, grillwork, fire doors, and galvanized 
          ductwork. No sanding or etching or deglossing agents are needed to get 
          a firm bond. B-I-N provides an "anchor" for the top coat so 
          it can't be chipped or scraped off easily. Whatever 
          horrible paint or wallcovering may have been used before, you can make 
          a new start with B-I-N. One coat will transform the grimmest, darkest 
          colors into a flat white ready for new finish paint or wallcovering. |  |