This
product line represents an intermediate step between our high quality
white pigmented lacquers and our extremely durable conversion varnish
series. The blending of these two technologies creates a product that
demonstrates the ease of application normally associated with lacquer,
coupled with performance characteristics resembling the conversion varnishes.
Product
Preparation & Application
Material
Preparation: This product is prepared at application viscosity
and should require no thinning prior to use. However, if the conditions
at your facility dictate that a thinner be incorporated, we recommend
the use of our SOL-9011 HAPs Free Thinner at levels not to exceed 10%
by volume. If conditions dictate that a retarder be added, we recommend
our SOL-9012, HAPs Free Industrial Retarder be used at a level not to
exceed 5% by volume.
NOTE: Effective dry times will be lengthened if retarder is added.
Application:
For optimum performance of this Precatalyzed lacquer, we recommend that
it be applied as a self-sealing system. When applied as a self-sealing
system, we recommend that the total coating system not exceed three coats,
with a final dry film thickness no greater than 3 mils. If a faster drying
sanding sealer is required, we recommend the use of our precatalyzed vinyl
primer, 110-0002, which should be applied at one coat with a maximum dry
film thickness of 1 mil. The sealer coat should be followed by a maximum
of two coats of HAPs Compliant AC/HC Precatalyzed Lacquer to produce a
final coating system with a maximum dry film thickness of 3 mils.
Clean-up:
Use #500 Gem Coat Lacquer Thinner or SOL9011 HAPS Free Thinner to clean
up all equipment. Dispose of in accordance with Federal, State, and Local
regulation regarding pollution.
Product
Advantages
HAPs Compliant
AIM Compliant
High Solids
User Friendly
No Catalyst Required
Self-Sealing
Non-Yellowing
Controlled Tint Strength
Can be Tinted to Virtually any Pastel Color Using Industrial Colorants
No Critical Recoat Time
Passes KCMA Performance Requirements
Passes ASTM Performance Requirements
|