Recommended Uses:
Cabot® Solid Color Oil Decking Stains combine maximum color and U.V. protection with a tough alkyd resin. The results are a completely opaque finish that imparts lasting beauty for deck surfaces. Containing 100% alkyd resin, these solid color stains are extremely durable and are formulated to withstand foot traffic and wear. Cabot Solid Color Oil Decking Stains are excellent for use on most types of exterior wood decking, including pressure-treated pine, red and white cedar, fir, cypress, redwood and on hardwoods such as mahogany, cambara, meranti and other exotic wood species.

Composition:
Special blends of alkyd resins along with all-natural pigments.

Finish:
Dries to a uniform opaque finish.

Coverage:
On smooth surfaces, approximately 400-500 square feet per gallon
(9.8-12.3 square meters per liter); on rougher surfaces, 250-350 square feet per gallon (6.1-8.6 square meters per liter). These rates will vary depending upon the porosity of the surface.

Restrictions:
Do not apply in direct sunlight, to hot surfaces, or when air or surface temperature is below 50°F or may fall below 50°F for 48 hours after application. Do not apply over wet or damp surfaces or when rain is imminent. Do not apply adjacent to fresh stucco and masonry. Do not apply over water-based products. Do not thin this product. Not recommended for use on Incense Cedar. Not intended for interior surfaces. For exterior use only. To ensure desired appearance and proper drying time, always finish a small test area before proceeding.