Paint Colors :: MANUFACTURERS :: MINWAX :: MINWAX 60960 LOW GLOSS HARDWOOD FLOOR REVIVER SIZE:QUART.

    MINWAX 60960 LOW GLOSS HARDWOOD FLOOR REVIVER SIZE:QUART.
MINWAX 60960 LOW GLOSS HARDWOOD FLOOR REVIVER SIZE:QUART. 

Minwax® Hardwood Floor Reviver refreshes hardwood floors that are worn, scratched, or dull. It is available in both High-Gloss and Low-Gloss sheens. Applying Reviver requires no sanding or special preparation, just squirt onto floor, spread with application tool and let dry. Provides beauty and protection for 3-6 months.

Directions

PREPARE THE FLOOR:

•Sweep or vacuum the floor to remove all loose dirt
•Wash the floor with a mild oil-free cleaner such as Minwax® Hardwood Floor Cleaner
•Allow to dry completely
•Test Minwax® Hardwood Floor Reviver on a small inconspicuous area of the floor such as inside a closet to ensure adhesion and compatibility. Wax and other ingredients in some floor polishes may cause Reviver to bead up or prevent it from adhering to the floor.
Note: Minwax® Hardwood Floor Reviver is not recommended for use over unfinished, newly finished, waxed or oiled floors. To test for wax, apply a few drops of water to the floor. Wait 10 minutes. If the wetted area turns white, the floor may have a wax coating. Reviver is not designed for use on floors that are in very poor condition. Badly damaged floors or floors that have large areas where the finish is worn away will require a complete refinishing.

APPLY THE COATING:

•Rock the bottle several times before opening the cap. Do not shake.
•Squirt Minwax® Hardwood Floor Reviver lightly in an "S" pattern directly onto the floor in a 3 x 3 foot area using a damp painter's pad or synthetic applicator attached to a long handle, spread Reviver across the floor.
•Work in the direction of the grain using a back-and-forth motion. Keep working in small sections until the entire floor is coated. For best results, apply a thin, even coat. Keep airborne dust to a minimum while the floor is wet.

ALLOW THE COATING TO DRY:

•Let the finish dry at least two hours before walking lightly on the floor. Do not walk on the floor if the surface is wet or tacky. Avoid heavy traffic and do not replace furniture or rugs for 24 hours after application. When replacing furniture do not slide.
Hardwood Floor Reviver can be reapplied as needed (usually about every 6 months) to keep your floor looking beautiful.

CLEAN-UP: Application tools can be easily cleaned with soap and water.

 
   

Details
 
SKU: 2742660960
Weight3.00 lbs
Market price: $32.35
Price: $16.18

Options
 
Quantity Out of stock



  50%
 

    Recommended products list
  • WOOSTER 4153 ULTRA/PRO LINDBECK EXTRA FIRM ANGLE SASH SIZE:2.5" PACK:6 PCS.
  • WOOSTER R042 SHERLOCK GT CONVERSION TIP PACK:3 PCS.
  • WOOSTER R189 TRAFFIC LINER SIZE:4" PACK:12 PCS.
  • SEYMOUR 20-669 SPRAY FLUORESCENT BLUE STRIPE INVERTED TIP WATERBASE MARKER SIZE:20 OZ. SPRAY PACK:12 PCS.
  • RUSTOLEUM 19188 1918830 SPRAY PAINT EARTH BROWN CAMOUFLAGE SIZE:12 OZ. SPRAY PACK:6 PCS.
  • SHEFFIELD 4659 #25 PHTHALO GREEN TINTS ALL SIZE:PINT.
  • ZINSSER 04309 READY PATCH LITE LIGHTWEIGHT SPACKLING & PATCHING COMPOUND SIZE:1/2 PINT
  • RUSTOLEUM 242253 GLOSS BLACK PROFESSIONAL OIL BASED ENAMEL 100 VOC SIZE:1 GALLON.
  • VALSPAR 990 PREP STEP INT LATEX PRIMER SIZE:1 GALLON.
  • DAP 21430 PLASTIC WOOD SOLVENT WOOD FILLER MAPLE SIZE:4 OZ PACK:12 PCS.
  •  
     

     

    Popular Categories

    METALLIC PAINT

    WOOD STAINS

    CONCRETE FLOOR PAINT

    POOL PAINT

    SPRAY PAINT

     

     

     

    Popular Brands

    MODERN MASTERS

    HAMMERITE

    DRYLOK

    CABOT STAIN

     

    ZAR

    MINWAX

     

    Best Seller Products

    Minwax Poly

    Zar Stain

    Danish Oil

    Last N Last

    Roller Cover

    Modern Masters Metallic Paint

    Hammerite Paint

     
     
    We accept major credit cards
    credit cards logo
     
     
    SEO by site SEO
     
     
    CONNECT WITH US
    Copyright 2005-2015 Paint Colors - All Rights Reserved