Paint Colors :: MANUFACTURERS :: MINWAX :: MINWAX 43005 SEMI GLOSS POLYURETHANE SIZE:PINT.

    MINWAX 43005 SEMI GLOSS POLYURETHANE SIZE:PINT.
MINWAX 43005 SEMI GLOSS POLYURETHANE SIZE:PINT. 

Minwax® Fast-Drying Polyurethane is a clear, hard finish that dries fast to protect and beautify interior wood surfaces such as furniture, cabinets, moldings, and doors. Minwax® Fast-Drying Polyurethane Finish is among the most durable coatings for wood protection. Minwax® Fast-Drying Polyurethane's long-lasting protective finish makes it ideal for use on both finished and unfinished wood.

Directions

1.Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
2.Sand to obtain a smooth uniform surface. Remove all dust with a cloth dampened with mineral spirits.
3.Stir Minwax® Fast-Drying Polyurethane before and during use to eliminate settling on the bottom of the can. Stir in such a manner as to rotate the product from the bottom to the top of the can. NEVER SHAKE.
4.Apply a THIN coat of Minwax® Fast-Drying Polyurethane using a high-quality natural or foam brush.
5.Let dry 4-6 hours. Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust.
6.Apply second coat. If third coat is desired, repeat step 5 before application.
7.After final coat, allow 24 hours before light use.
When used on wooden floors, use a lambs wool or synthetic pad applicator or natural bristle brush and maintain a wet edge to avoid lap marks. For maximum durability, we recommend three coats. Avoid heavy traffic and replacing of furniture for 72 hours after final coat. When replacing furniture, do not slide. Do not install rugs or clean floors for 7 days.

CLEAN-UP: For easy clean-up use mineral spirits or paint thinner.

COVERAGE: Approximately 125 square feet per quart.

Note: Above dry times are based on good ventilation, temperature of 77°F and 50% relative humidity. Lower temperature, higher humidity, lack of air movement or application of thick coats will extend drying times. Always test tackiness between coats. Do not sand or re-coat when surface is tacky. Slight ambering may be experienced when Polyurethane is applied over light-colored wood surfaces. Always spot test on an inconspicuous area to ensure satisfactory results. For light-colored wood surfaces, we recommend protecting with Minwax® Polycrylic® Protective Finish.

 
   

Details
 
SKU: 2742643005
Weight2.00 lbs
Market price: $15.68
Price: $7.84

Options
 
Quantity Out of stock



  50%
 

    Detailed images


 

    Recommended products list
  • WOOSTER R204 SUPER DOO-Z ROLLER COVER SIZE:9" NAP:1/2" PACK:12 PCS.
  • MINWAX 41600 WOOD FILLER SIZE:6 OZ.
  • CABOT STAIN 50812 PRO V.T. ULTRA WHITE SOLID ACRYLIC SIZE:5 GALLONS.
  • DUMOND CHEMICAL 1024 PEEL AWAY PAPER SIZE:10 SQUARE METTER
  • RUSTOLEUM 19108 1910830 SPRAY PAINT GOLD METALLIC SPECIALTY SIZE:12 OZ. SPRAY PACK:6 PCS.
  • GARDNER GIBSON 6230-9-34 BLACK JACK WET SURFACE ROOF CEMENT SIZE:1 GALLON
  • 3M 99421NA 9" X 11" 320A WET OR DRY PRO PAK PACK:25 PCS.
  • VALSPAR 1426 LATEX CEILING PAINT WHITE SIZE:1 GALLON.
  • DAP 25032 COVE BASE LATEX BASED ADHESIVE SIZE:10.1 OZ PACK:12 PCS.
  • DAP 18232 KWIK FOAM POLYURETHANE INSULATING FOAM SEALANT SIZE:24 OZ PACK:12 PCS.
  •  
     

     

    Popular Categories

    METALLIC PAINT

    WOOD STAINS

    CONCRETE FLOOR PAINT

    POOL PAINT

    SPRAY PAINT

     

     

     

    Popular Brands

    MODERN MASTERS

    HAMMERITE

    DRYLOK

    CABOT STAIN

     

    ZAR

    MINWAX

     

    Best Seller Products

    Minwax Poly

    Zar Stain

    Danish Oil

    Last N Last

    Roller Cover

    Modern Masters Metallic Paint

    Hammerite Paint

     
     
    We accept major credit cards
    credit cards logo
     
     
    SEO by site SEO
     
     
    CONNECT WITH US
    Copyright 2005-2015 Paint Colors - All Rights Reserved