Paint Colors :: MANUFACTURERS :: HAMMERITE :: HAMMERITE 42245 SPRAY PAINT GRAY SMOOTH FINISH SIZE:12 OZ. SPRAY.

    HAMMERITE 42245 SPRAY PAINT GRAY SMOOTH FINISH SIZE:12 OZ. SPRAY.
HAMMERITE 42245 SPRAY PAINT GRAY SMOOTH FINISH SIZE:12 OZ. SPRAY. 

DESCRIPTION:
ONE STEP FINISH – PAINT RIGHT OVER RUST
HAMMERITE is a self-priming quick-dry gloss paint coating.
HAMMERITE is designed for use on rusty metal and most other metal surfaces, without the need of a primer.

GLASSGUARD PROTECTION: As the HAMMERITE coating dries, millions of heat-hardened glass flakes interlock with the special resins forming a super-tough barrier that seals out moisture to prevent rusting.

The Quick-dry Smooth finish contains no silicones or aluminum.

RECOMMENDED USES:
HAMMERITE is a long-lasting coating that can be applied directly over a firm, rusty surface. Aluminum, galvanized and zinc sprayed surfaces require a prime coating of HAMMERITE GALVANIZED AND ALUMINUM PRIMER. HAMMERITE Galvanized and Aluminum Primer dries to touch in 1-2 hours @ 60ºF (16ºC). Allow primer to dry 24 hours before applying finish coat. HAMMERITE aesthetic value and rust protection properties make a durable coating for exterior applications on residential and commercial projects. Some suggested uses are:
1. Exterior doors, mail boxes, wrought iron, ventilation pipes/fittings. Wheel barrows, swing sets, snow
blowers, lawn mowers, fences, storage sheds, etc
2. Playground equipment, recreation vehicles, boat trailers, etc.
3. Architectural structures, tank farms, machinery, theme parks, transportation equipment, above water marine applications, etc.
4. Frames, wheels, bumpers, trailer hitches, under car and truck carriages, trunk areas, floor trays, etc.

SURFACE PREPARATION:
Remove all loose rust, paint and millscale. This can be achieved by scraping, sanding or wire brushing. Remove all dirt, oil, grease, salt contamination from ocean or street salt, and mildew, using an approved cleaner, fresh water and a commercial mildew remover. Rinse surface thoroughly and let dry before continuing. Smooth or hard, slick surfaces must be deglossed or abraded by sanding or grit blasting. A new or clean metal surface that is very smooth and/or glossy, or non-porous MUST be sanded with a minimum 80 grit sandpaper. DO NOT use any rust converter, or any other acid or conversion type product to clean or prepare a rusted surface before applying a Hammerite coating. Aluminum and galvanized surfaces require a prime coating of HAMMERITE Galvanized and Aluminum Primer. Professional painting practice required previously painted or shop primed surfaces must be "patch" tested for compatibility. Apply HAMMERITE to a small area and expose for 72 hours minimum and check for adhesion and any signs of lifting or cracking, etc.

AEROSOL CONTAINERS:
Read and follow all application and precautionary information. Shake can for two or three minutes after activating ball and occasionally during use. Spray light, even coats, holding the container upright approximately 8” to 12” from surface being painted. Three to five coats will be required to eliminate any pinholes and thin spots to achieve the 4 mil dry thickness required to keep moisture from penetrating the coating. The final coating must be thick enough to flow to a smooth even finish with a well-defined pattern, but not heavy enough to run. Make sure all corners, edges and heavily pitted areas are adequately coated. All coatings can be applied as soon as the previous coating is dry to touch, about 15 minutes. All coatings must be applied within one hour or after 10 days cure time. After use, invert container (turn upside down) and spray to clear valve of the paint coating.

For printing reasons, the color shown on the front of the container and/or color card may not exactly
match the color of the paint.

 
   

Details
 
SKU: 5165242245
Weight2.00 lbs
Market price: $13.95
Price: $9.33

Options
 
Quantity Out of stock



  33%
 

    Detailed images
HAMMERITE 42245 SPRAY PAINT GRAY SMOOTH FINISH SIZE:12 OZ. SPRAY.

 

    Recommended products list
  • MODERN MASTERS 14401 WF-144 WILDFIRE BRILLIANT YELLOW FLOURESCENT SIZE:1 GALLON.
  • WOOSTER Z1104 MAJESTIC PAINT BRUSH BLACK CHINA SIZE:2" PACK:6 PCS.
  • WOOSTER Z1222 LINDBECK SILVER TIP ANGULAR SASH BRUSH SIZE:2.5" PACK:6 PCS.
  • SEYMOUR Z-607 ATHLETIC FIELD MARKING MACHINE
  • ZINSSER 69384 SUREGRIP HEAVY DUTY CLEAR W/C ADHESIVE SIZE:QUART.
  • ALLWAY WP6-3 6" X 6" WALL PATCH PACK:10 PCS.
  • KRYLON K08812000 SPRAY DUAL PAINT + PRIMER IN ONE GLOSS LEATHER BROWN SIZE:12 OZ. SPRAY PACK:6 PCS.
  • GARDNER GIBSON 6025-9-34 BLACK JACK NON-FIBER ROOF AND FOUNDATION COATING SIZE:1 GALLON.
  • WHIZZ 99000 WHITE & YELLOW STRIPE ACRYLIC ROLLER CLAMSHELL SIZE:4" PACK:10 PCS.
  • 3M TDTD TACK DOWN TAPE DISPENSER FOR M3000 PACK:12 PCS.
  •  
     

     

    Popular Categories

    METALLIC PAINT

    WOOD STAINS

    CONCRETE FLOOR PAINT

    POOL PAINT

    SPRAY PAINT

     

     

     

    Popular Brands

    MODERN MASTERS

    HAMMERITE

    DRYLOK

    CABOT STAIN

     

    ZAR

    MINWAX

     

    Best Seller Products

    Minwax Poly

    Zar Stain

    Danish Oil

    Last N Last

    Roller Cover

    Modern Masters Metallic Paint

    Hammerite Paint

     
     
    We accept major credit cards
    credit cards logo
     
     
    SEO by site SEO
     
     
    CONNECT WITH US
    Copyright 2005-2015 Paint Colors - All Rights Reserved