Recommended Uses:
Cabot Bleaching Oil #3241 is uniquely formulated to accelerate the natural weathering process of uncoated exterior wood. It contains a small amount of gray pigment and a chemical ingredient that actually bleaches the wood’s surface. When first applied, this product gives a delicate gray tone, and during the first few months’ exposure it gradually turns into a beautiful, natural driftwood gray color. This weathered effect, if derived by nature, would require many years of harsh exposure, which often turns wood dark and uneven in appearance. Cabot Bleaching Oil produces a selfprotecting finish and achieves a uniform weathered look in only 6 to 12 months. Cabot Bleaching Oil is for use on new exterior wood that has not been previously treated. It can also be applied to wood previously treated with Cabot Bleaching Oil. It is an ideal finish for siding, shingles, shakes, fences, and railings and can be used on almost any type of uncoated lumber, such as cedar, fir, pine, spruce, cypress and redwood.

Composition:
Lightly pigmented, deep penetrating, natural linseed oil-based stain.

Finish:
Dries to a natural, flat finish.

Coverage:
On smooth surfaces, approximately 400-600 square feet per gallon; on rough surfaces, 150-250 square feet per gallon. These rates will vary depending upon the porosity of the surface.

Restrictions:
Do not apply over previously painted or sealed surfaces, metal, masonry or adjacent to fresh stucco. For these areas and on window sashes, glazing compounds, frames and sills, Cabot PRO.V.T®. and The Finish House & Trim Paint are recommended. Do not use on decks or other horizontal surfaces. Cabot Decking Stains, as well as Cabot Solid Color 100% Acrylic Decking Stains #1800 should be used. Do not thin this product. Do not tint this product. Not intended for interior surfaces. For exterior use only.