Cabot® Solid Color 100% Acrylic Decking Stains are extremely durable
exterior stains for use on all wood decking,outdoor furniture and fencing,
as well as cement patios and walkways. This exceptionally long-lasting,
100% acrylic finish is also water repellent and fade resistant. It will
resist scuffing and dirt/scuff marks. Solid Color 100% Acrylic Decking
Stains are ideal for use on most types of lumber including redwood,
cedar, cypress, pine and fir, as well as pressure-treated wood. Solid
Color 100% Acrylic Decking Stain is easy to apply, dries quickly and
cleans up with soap and water. They provide excellent adhesion to new,
previously stained or painted surfaces which are in a clean, sound condition.
Decks, fencing, wood patios, porches, outdoor furniture, steps, railings
and cement patios.
Richly pigmented, opaque, 100% acrylic-based stain.
Dries to a uniform, durable, low-lustre finish.
Approximately 150-250 square feet per gallon. These rates will vary
depending upon the porosity and type of surface. Spread rates will increase
when applying a second coat.
Do not thin. Do not apply in direct sunlight, to hot surfaces or when
the air and surface temperature is below 50°F or may fall below
50°F. Do not apply over wet surfaces or when rain is imminent. Protect
stored containers from freezing. Do not use Neutral, Medium or Deep
Bases without the addition of universal colorants. Not intended for
siding surfaces. For siding, use PRO.V.T.® Solid Color Acrylic Stain
or The Finish House & Trim Paint. Not intended for interior surfaces.
For exterior use only. Weathered and/or reconditioned wood surfaces
require an application of Cabot Problem- Solver® Oil Primer prior
to topcoating. Do not apply over freshly applied Decking Stain (#1400
Series) or Cabot Clear Solution®. Either strip these coatings or
wait one year for the coating to weather sufficiently.