Polyurethane Wood Floor Finish 550 VOC
ABSCO Professional Polyurethanes offers the latest technology
in environmentally compliant wood floor finishes. ABSCO’s high
solid content will beautify and protect most commercial and residential
wood floors, providing years of enjoyment. ABSCO can also offer superior
protection to most other interior wood surfaces, such as handrails,
trims, furnitures and cabinets.
Absco Polyurethane Wood Floor Finish is recommended for most interior
commercial and residential wood.
Color in Container: Gloss - Clear ; Satin – Hazy; Semi-Gloss –
Solids Content/weight: Gloss – 50% ; Satin – 39% ; Semi-Gloss
Solids Content/volume: Gloss – 47% ; Satin – 36% ; Semi-Gloss
Chemical Resistance: Excellent
VOC: VOC does not exceed 550 grams/liter
Flash Point: 105°F
Sheen Gloss: No less than 90 units on wood.
Satin: 25-35 units on wood.
Semi-Gloss: 50-60 units on wood.
Freeze/Thaw Stability: Stable
Shelf Life: Unlimited in unopened container.
Drying Time: 4-6 hrs. under good conditions .
Cleanup: Mineral Spirits, Paint Thinner, Turpentine
Application method: Lambswool applicator, natural bristle brush or E-Z
Coverage Approx: 500-600 sq feet per gallon on raw wood.
surface preparation is essential to achieve a high quality finish. Read
the MSDS sheet and wear proper protection, which may include gloves,
eye protection, and/or other protective devices.
New or Newly Sanded Floors or Wood Surfaces:Prepare the floor according
to NWFA or NOFMA accepted standard. The final pass before application
of Absco Polyurethane Wood Floor Finish and sealer should be a #100
to #150 grit screen pad or sandpaper. Remove dust completely by sweeping,
vacuuming and wiping the floor or work surface with a lint free cloth
lightly dampened with mineral spirits. Avoid using fillers that contain
stearates or wax. The floor or work surface and room temperature should
be at least 65°F.
Finished Floors or Wood Surfaces:Remove old finish in poor condition.
Screen the work surface with a #100 to #150 screen disc, #180 grit sand
paper, maroon pad or similar. Remove dust completely by sweeping, vacuuming
and wiping the floor or work surface with a lint free cloth lightly
dampened with mineral spirits. Avoid using fillers that contain stearates
or wax. The floor or work surface and room temperature should be at
TO STIR THIS PRODUCT BEFORE AND DURING USE. SATIN AND SEMI-GLOSS CAN
BE SHAKEN. AFTER SHAKING, LET IT SIT FOR 10 MINUTES.
Apply the finish with the grain of the wood. Apply in well ventilated
area by brush, roller, spray, EZ-way applicator or lambswool applicator
at room temperature and not in direct sunlight. When using a roller,
work slowly to avoid air bubbles. Screen the floor or work surface in
between coats with any of the following #100 to #150 screen disc, #180
grit sand paper, maroon pad or similar in between coats. Remember to
vacuum and tack thoroughly after screening to remove all dust. Allow
a minimum of six hours between coats, or until thoroughly dry. Heavy
finish application, high humidity or lack of airflow will extend drying
times. If waiting longer than 24 hours between coats, sanding is recommended.
over stain: Absco Polyurethane Wood Floor Finish should adhere well
to most stain. If a stain other than Last•n•Last is to be
used, a test for adhesion is recommended. Use Last•n•Last
Classic Wood Stain following instruction on label. Allow to dry a minimum
of 24 hours under good conditions. Make sure the stain is completely
dry before applying the Finish.
When applied according to directions, and in thin coats, Absco Polyurethane
Wood Floor Finish should be dry to the touch in 4 to 6 hours. Allow
minimum of 6 hours between coats. Heavy finish application, high humidity
or lack of airflow will extend drying times. Absco Polyurethane Wood
Finish completely cures within 2 weeks.
Use paint thinner, mineral spirits or turpentine to clean brushes and
Absco Polyurethane Wood Floor Finish never needs waxing. We recommend
Polycare Floor Cleaner as the safe and effective cleaning product for
all polyurethane coated surfaces. It has a unique soap-free, no rinse
formula which will not harm polyurethane or varnished wood surfaces.