& Door Spar varnish Oil-n-H20 Technology
Last•n•Last Marine & Door Spar Varnish will provide
outstanding protection for all types of exterior woodwork. Formulated
to resist mold and mildew, Last•n•Last Marine & Door
Spar Varnish is the clear choice for exterior wood
protection . It incorporates the latest Oil• n• H20 technology,
which will provide superior durability, fast dry times and soap &
water clean-up. It will provide outstanding beauty and durability. It
contains UV absorbers for long lasting sun protection. Adhesion is excellent
– resists flaking and chipping. Not recommended for decks of siding.
Last•n•Last Marine & Door Spar Varnish is recommended
for exterior doors, trims, windowsills, outdoor furnitures, wooden boat
parts above the water line.
Color in Container: Yellowish white (Dries clear)
Solids Content: 30+/-1%
Chemical Resistance: Excellent
VOC: VOC does not exceed 275grams/liter
Flash Point: 198°F
Sheen Gloss: >80 units @ 60° on wood
Satin: 55-60 units @ 60° on wood
Freeze/Thaw Stability Stable (if frozen, thaw completely before using)
Pot Life Unlimited in unopened container
Dry Time: 2 hours with good conditions
Clean Up: Water
Application method: Nylon brush
Coverage: 400-500 sq. feet per gallon.
surface preparation is essential to achieve a high quality finish. Read
the MSDS sheet and wear proper protection, which may include gloves,
eye protection, and/or other protective devices.
New or Newly Sanded Wood Surfaces: Make several passes with the sandpaper,
increasing the paper fineness with each pass. The final pass before
application of Last•n•Last Marine and door spar varnish
should be with a #100 to #150 grit screen pad or sandpaper. Remove dust
by sweeping, vacuuming and wiping the work surface with a lint free
cloth lightly dampened with water. The work surface and room temperature
should be at least 65°F.
Previously Finished Wood Surfaces:
Remove old finish in poor condition. Screen the work surface with #180
grit sand paper, maroon pad or similar. Remove dust completely by sweeping,
vacuuming and wiping the work surface with a lint free cloth lightly
dampened with water. The work surface and room temperature should be
at least 65°F.
Apply the finish with the grain of the wood. Apply in well ventilated
area with a good quality brush . Avoid applying the finish in direct
sunlight or let the uncured coating be exposed to moisture. Screen the
work surface in between coats with any of the following #180 grit sand
paper, maroon pad or similar in between coats. Remember to vacuum and
tack thoroughly after screening to remove all dust. Allow minimum of
two hours between coats, or until thoroughly dry. Heavy finish application,
high humidity or lack of airflow will extend drying times. If waiting
longer than 24 hours between coats, sanding is recommended. A minimum
of 4 is recommended on unsealed wood; 3-4 coats on previously sealed
When applied according to directions, and in thin coats, Last•n•Last
Marine & Door Spar varnish should be dry to the touch in 1 hour.
Allow minimum of 2 hours between coats. Heavy finish application, high
humidity or lack of airflow will extend drying times. Last·n·Last
Marine & Door Spar varnish completely cures within 2 weeks.
Use water to clean brushes and applicators.
We recommend to recoat it periodically depending on the harshness of
the outdoor conditions. We recommend Polycare Cleaner as the safe and
effective cleaning product for all polyurethane coated surfaces. It
has a unique soap-free, no rinse formula which will not harm polyurethane
or varnished wood surfaces.