Polyurethane Wood Floor Finish 450-VOC
Professional Polyurethanes offers the latest technology in environmentally
compliant wood floor finishes. ABSCO’s high solid content will
beautify and protect most commercial and residential wood floors, providing
years of enjoyment. ABSCO can also offer superior protection to most
other interior wood surfaces, such as handrails, trim, furniture and
Absco Polyurethane Wood Floor Finish is recommended for most interior
commercial and residential wood.
Color in Container :Gloss - Clear / Satin - Hazy/ Semi-Gloss –
Solids Content/weight: Gloss – 50% / Satin – 51% / Semi-Gloss
Chemical Resistance: Excellent
VOC: VOC does not exceed 450 grams/liter
Flash Point: 105°F
Sheen Gloss: No less than 90 units on wood.
Satin: 25-35 units on wood.
Semi-Gloss: 50-60 units on wood.
Freeze/Thaw Stability: Stable
Shelf Life: Unlimited in unopened container.
Drying Time: 12 hrs. under good condition.
Cleanup: Mineral Spirits, Paint Thinner, Turpenine.
Application method: Lambswool applicator, natural bristle brush or E-Z
Coverage Approx: 500-600 sq feet per gallon on raw wood.
surface preparation is essential to achieve a high quality finish. Read
the MSDS sheet and wear proper protection, which may include gloves,
eye protection, and/or other protective devices.
New or Newly Sanded Floors or Wood Surfaces: Prepare the floor according
to NWFA or NOFMA accepted standard. The final pass before application
of Absco Polyurethane Wood Floor Finish and sealer should be a #150
grit screen pad or sandpaper. Remove dust completely by sweeping, vacuuming
and wiping the floor or work surface with a lint free cloth lightly
dampened with mineral spirits. Avoid using fillers that contain stearates
or wax. The floor or work surface and room temperature should be at
Previously Finished Floors or Wood Surfaces: Remove old finish in poor
condition. Screen the work surface with a #150 screen disc, #180 grit
sand paper, maroon pad or similar. Remove dust completely by sweeping,
vacuuming and wiping the floor or work surface with a lint free cloth
lightly dampened with mineral spirits. Avoid using fillers that contain
stearates or wax.The floor or work surface and room temperature should
be at least 65°F.
TO STIR THIS PRODUCT BEFORE AND DURING USE. SATIN AND SEMI-GLOSS CAN
BE SHAKEN. AFTER SHAKING, LET IT SIT FOR 10 MINUTES.
Apply the finish with the grain of the wood. Apply in well ventilated
area by brush, roller, spray, EZ way, lambswool applicator at room temperature
and not in direct sunlight. When using a roller, work slowly to avoid
air bubbles. Screen the floor or work surface in between coats with
any of the following #150 screen disc, #180 grit sand paper, maroon
pad or similar in between coats. Remember to vacuum and tack thoroughly
after screening to remove all dust. Allow minimum of four to eight hours
between coats, or until thoroughly dry. Heavy finish application, high
humidity or lack of airflow will extend drying times. If waiting longer
than 24 hours between coats, sanding is recommended.
over stain:Absco Polyurethane Wood Floor Finish should adhere well to
most stain. A test for adhesion over brands other than Last•n•Last
stain is recommended. Use Last•n•Last Classic Wood Stain
following instruction on label. Allow the stain to dry a minimum of
24 hours under good conditions. Make sure the stain is completely dry
before applying the Finish. Drying time: When applied according to directions,
and in thin coats, Absco Polyurethane Wood Floor Finish should be dry
to the touch in 4-6 hrs. Allow minimum of 12 hours between coats. Heavy
finish application, high humidity or lack of airflow will extend drying
times. Absco Polyurethane Wood Finish completely cures within 2 weeks.
Use paint thinner, mineral spirits or turpentine to clean brushes and
Absco Polyurethane Wood Floor Finish never needs waxing. We recommend
Polycare Floor Cleaner as the safe and effective cleaning product for
all polyurethane coated surfaces. It has a unique soap-free, no rinse
formula which will not harm polyurethane or varnished wood surfaces.