Quick Dry Polyurethane Primer / Sanding Sealer-500 VOC
Absco Professional Quick Dry Polyurethane Primer
Sealer offers the latest technology in environmentally compliant wood
floor sealers. Absco’s high solid content will seal wood surfaces
with 100% polyurethane protection, and will be ready to sand in as little
as 2 hours when applied according to directions.
Excellent for sealing most interior wood surfaces, including floors,
doors, cabinets & furnitures.
Color in Container: Amber
Solids Content Weight: 43-44%
Chemical Resistance: Excellent
VOC: Does not exceed 500 g/l
Flash Point: 105°F
Sheen: Not Applicable
Freeze/Thaw Stability Stable
Dry Time:2 hours under good conditions
Clean Up: Mineral Spirits, Paint Thinner, Turpentine
Shelf Life: Unlimited in unopened container.
Application method: Lambswool applicator, natural bristle brush, and
EZ way Applicator
Coverage: 550-650 sq. feet/gal
surface preparation is essential to achieve a high quality finish. Read
the MSDS sheet and wear proper protection, which may include gloves,
eye protection, and/or other protective devices.
New or Newly Sanded Floors or Wood Surfaces:
Prepare the floor according to NWFA or NOFMA accepted standard. The
final pass before application of Absco Quick Dry Polyurethane Primer
/Sanding Sealer should be with a #100 to #150 grit screen pad or sandpaper.
Remove dust completely by sweeping, vacuuming and wiping the floor with
a lint free cloth lightly dampened with mineral spirits. The floor and
room temperature should be at least 65°F.
Apply Absco Quick Dry Polyurethane Primer /Sanding Sealer with the grain
of the wood. Apply in well ventilated area by brush, roller, spray,
EZ way , or lambswool applicator at room temperature and not in direct
sunlight. When using a roller work slowly to avoid air bubbles. Screen
the floor or work surface in between coats with any of the following
: #150 screen disc, #180 grit sand paper, maroon pad or similar in between
coats, or until thoroughly dry. Heavy finish application, high humidity,
or lack of air flow will extend drying times. If waiting longer than
24 hours between coats, sanding is recommended.
When applied according to directions, Absco Quick Dry Polyurethane Primer/Sanding
Sealer should be to sand and recoat in 2 hours. Heavy application, high
humidity or lack of airflow will extend drying times.