Cabot S•P•F Deck & Fence Finishes marks an entirely
new dimension in exterior deck and fence protection. This product provides
a level of water-repellency and U.V.protection beyond conventional wood
treatments through a unique coating technology. Cabot S•P•F
can be applied just hours after rain or surface washing because of its
moisture-friendly (hydrophilic) resin system that actually uses surface
moisture to penetrate and level. The result is a super-premium and remarkably
easy-to-use exterior wood finish that delivers true performance and
100% acrylic resin and trans-oxide colorants
All tones have a near, flat finish.
On smooth surfaces, approximately 300-400 square feet per gallon; 150-250
on rough surfaces. These rates will vary depending upon the moisture
content and porosity of the surface.
Do not apply in direct sunlight, to hot surfaces or when air or surface
temperature is below 40°F or above 90°F. Rain should not be
imminent for 12 hours after final application. Do not thin this product.
Protect stored containers from freezing. Rusting of non-stainless steel
fasteners is not a result of using this product. For exterior use only.