When you are choosing a finish for your wooden flooring you will want the best. Your finish will protect your floor from every day wear and tear, dirt and moisture, and provide color and luster that will enhance the beauty and give your flooring its own personality. Normally there are two types of wood finishes to choose from that is either surface finish or penetrating finish. Last n last polyurethane wood finish are usually glossy but may be designed to produce satin or semi-gloss sheens by adding flatting agents. It has little or no color, is transparent, and has no added pigment, unlike paints or wood stains that contain pigment and usually range from opaque to translucent. Last n last polyurethane wood finish can also be applied over wood stains as a final step to achieve a layer for gloss and protection.
Last n last polyurethane wood finish has been hailed to be an easy-to-apply yet durable wood finish. These two qualities make applying this finish a smart choice if you would like to protect your woodworking projects. When you choose it as a surface finish, all you need to do is to apply the stain to achieve the particular color you want; after that followed by a top coat of last n last polyurethane wood finish or varnish to give a protective coat to your floor. Surface finishes with last n last wood finish are very durable, moisture resistant, and are amazingly easy to maintain.
When using this product for varnishing your floors it is advisable that you stir or shake the product before use. Also to get a satisfactory finish the surface or floor where it is to be used should be properly cleaned of all the dirt otherwise it will not give the required sheen or luster. It is also necessary to wait for 4 to 6 hours between each application of the coats and also the coats should be thinner. Last n last polyurethane wood finish is generally applied in two or three coats and attains complete curing within two weeks of time. For previously finished floors or surfaces it is good to remove the finish with sand paper and then properly clear it of any remains of dust and then to proceed with the varnish.
These types of wood finishes need special care, use of water based products on this type of floor is usually not advisable, only solvent based waxes, buffing paste or cleaning liquids specifically designed for wax-finished floors are recommended for use.
Last n last polyurethane wood finish penetrates the wood to perform a protective seal to the surface of the wood flooring and is responsible for permanency to the floor. It has brilliant colour retention, dry up rapidly and far outwears the premium varnishes and lacquers. It repels yellowing and bruising longer. It is convenient to use and is resilient to scratch, foot movement, sun, salt, stains, water spotting, acid, alkali, etc. thereby making it a perfect candidate for varnish of wooden floorings or surfaces.